365 Views

Current Vacancies in an International Oil & Gas Group

Adexen Recruitment Agency – Our client, an international Oil & Gas group, is recruiting suitably qualified candidates to fill the positions below:

 

 

Job Title: Instrumentation Technician
Job Reference: 1345
Location: Nigeria
Function: Technical/technicians
Job Description

  • To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
  • To ensure that the work identified in the work permit is performed according to company specification

Commissioning Execution:

  • Performs on site the commissioning operations (test and check sheets ).
  • Report any non-conformity to his Supervisor
  • Ensures that the Company’s HSE regulations are respected (especially procedures related to Work Permits)
  • Witnessing of contractor pre-commissioning activities as defined by the supervisor.
  • Raise and clear punch List items
  • Reporting and progress follow up
  • Report daily activities to the supervisor

Expectations

  • Minimum Qualification : Technician
  • Education Level : High school or Higher National Diploma or Certificate
  • Experience: 2-5 years in a similar position

Mandatory Competences:

  • English / Commissioning / Instrumentation & Loop testing/Instrument tools : HART communicator , Druck pump

Recommended Competences:

  • ICAPS/OPERCOM
  • Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
  • Petroleum: Have a basic understanding of facilities / process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…).
  • Physics: Understanding and use of basic laws and units of physic (temperature, pressure, volume, density; specific gravity…).

Engineering:

  • Be able to read and use drawings (P&ID’s, ESD matrix and loop diagrams), vendor documents, name plate, datasheets. Be knowledgeable of instrument symbols.
  • Understand regulation principles and be able to analyse them (differentiation in between cascade, split range, simple).
  • Have a basic understanding of PCS, F&G, and ESD systems. Understand inhibit, alarm and trip concepts.

Equipment:

  • Understand working principle of basic instruments: level and interface level transmitters, thermocouples, manometers, vibration probes, metering devices (orifice plate, coriolis, turbine, volumetric)…
  • Correct use and handling of tubing, compression fittings, gaskets, “O” rings, cable glands…
  • Understand manual and automatic valves (including PSV) principle and command (positioner…).
  • Be familiar with all types of F&G detection (fusible loop, UV/IR, gas, smoke);
  • Know how to select and use the necessary hand tools.
  • Correct use and handling of multimeters, calibration unit, hydraulic pumps, temperature bath, smart calibrator.

Interested and qualified candidates should:
Click here to apply for this Position

 

 

 

Job Title: Mechanical Supervisor (Engineer)
Job Reference: 1346
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
Summary

  • Adexen Recruitment is mandated by an international Oil & Gas group to recruit a Punch List Coordinator for an offshore project.

Job Description

  • To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
  • To ensure that the work identified in the work permit is performed according to company specification.
  • Take care for the organization of the work such as Logistic, tools, spare parts, authorization.

Safety and Operations Management:

  • In charge to supervise yard and site execution as described in the Work permit. Ensure that :
    • The risks and safety precautions highlighted in the work permit are well understood by his team,
    • Check the place for any additional risks not identified in the work permit and report to his superintendent any hazardous deviation,
    • Perform pre-job meeting, check that the tools and PPE are in good condition,
    • Check that all required authorization to perform the job are granted,
    • Ensure that Company Standing instruction, Site Operating procedure, and additional operating procedure such as SIMOPS are known by the team and enforced,
    • Ensure that cleaning is done after completion of the work and the place is left safe.
  • Has full authority to stop the job of any member of his team in case of hazardous situation or unsafe behavior.
  • Stop any hazardous situation and immediately report to the site RSES.

Commissioning Execution:

  • Supervise the Witnessing of contractor pre-commissioning activities by his team of technicians, as defined by the superintendent. Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning. Ensure that witnessing activities do not delay contractor activities more than necessary.
  • Manage a small team of technicians to ensure that the work identified in the WP is performed in a professional manner, in respect with company specification.
  • Evaluate technical skills of his team members and help them to develop their skills on new equipment and technologies
  • Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, authorization, spare parts, documents…
  • Raise and clear punch List items. Report any nonconformity to his superintendent.
  • Validate Commissioning test and check sheets before superintendent approval.
  • Verifies the quality of his teams’ interventions by frequent on-site checks

Reporting and progress follow up:

  • Report daily activities to the superintendent.

Requirements

  • Minimum Qualification : Engineer
  • Education Level : Master’s degree or Higher National Diploma
  • Experience: 5-10 years in a similar position
  • Mandatory Competences: English / Mechanical engineering / Oil & Gas Process
  • Recommended Competences: ICAPS / OPERCOM / Commissioning

Interested and qualified candidates should:
Click here to apply for this Position

 

 

 

Job Title: Process Supervisor (Engineer)
Job Reference: 1348
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
Summary

  • Our client is recruiting a Process Supervisor for an Oil & Gas offshore project.

Job Description

  • To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
  • To ensure that the work identified in the work permit is performed according to company specification.
  • Take care for the organization of the work such as Logistic, tools, spare parts, authorization…

Safety and Operations Management:

  • In charge to supervise yard and site execution as described in the Work permit. Ensure that :
  • The risks and safety precautions highlighted in the work permit are well understood by his team,
  • Check the place for any additional risks not identified in the work permit and report to his superintendent any hazardous deviation,
  • Perform pre-job meeting, check that the tools and PPE are in good condition,
  • Check that all required authorization to perform the job are granted,
  • Ensure that Company Standing instruction, Site Operating procedure, and additional operating procedure such as SIMOPS are known by the team and enforced,
  • Ensure that cleaning is done after completion of the work and the place is left safe.
  • Has full authority to stop the job of any personnel under his work permit in case of hazardous situation or unsafe behavior.
  • Stop any hazardous situation occurring around and immediately report to the site RSES.

Commissioning Execution:

  • Supervise the Witnessing of contractor pre-commissioning activities by his team of technicians, as defined by the superintendent.
  • Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning.
  • Ensure that witnessing activities do not delay contractor activities more than necessary.
  • Manage the team of Contractor’s technicians and leak test specialists to ensure that the work identified in the WP is performed in a professional manner, in respect with company specification.
  • Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, authorization, spare parts, documents…
  • Raise and clear punch List items. Report any non-conformity to the discipline leader
  • Validate Commissioning test and check sheets before superintendent approval.
  • Verifies the quality of his teams’ interventions by frequent on-site checks

Reporting and Progress Follow up:

  • Report daily activities to the superintendent.
  • Follow-up the progress of each piping test-pack by means of specific table, as per Leader requirement

Minimum Qualification

  • An Engineer, with a Master’s Degree or Higher National Diploma

Experience:

  • 5-10 years in a similar position

Mandatory Competences:

  • Process engineering / Oil & Gas Process

Recommended Competences:

  • ICAPS / OPERCOM / Commissioning

 

Interested and qualified candidates should:
Click here to apply for this Position

 

 

Job Title: Mechanical Technician
Job Reference: 1347
Location: Nigeria
Function: Technical/technicians
Job Description

  • To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
  • To ensure that the work identified in the work permit is performed according to company specification.

Commissioning Execution:

  • Performs on site the commissioning operations (test and check sheets ) which are placed under his responsibility.
  • Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits)
  • Witnessing of contractor pre-commissioning activities as defined by the supervisor.
  • Raise and clear punch List items.
  • Report any non-conformity to his Supervisor
  • Report any non-conformity to the discipline Supervisor
  • Reporting and progress follow up
  • Report daily activities to the supervisor

Expectations

  • Minimum Qualification : Technician
  • Education Level : High school or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study)
  • Experience: 3 years in a similar position
  • Mandatory Competences: English / Mechanical equipment testing
  • Recommended Competences: Commissioning

Theoretical Knowledge:

  • Petroleum: Have a basic understanding of facilities / process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…).
  • Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
  • Physics: Understanding and use of basic laws and units of physic (Newton’s law, forces, mass, energy…). Be knowledgeable of materials / steels characteristics (use, resistance, corrosion and its prevention).

Engineering:

  • Be able to read and use drawings (P&ID’s, PFD’s, Isometrics), vendor documents (be able to determine tolerance and adjustment figures), name plate and data sheet.
  • Be able to draw accurate sketches and item to scale.

Equipment:

  • Understand the working principles of main mechanical equipment: filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valves types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps).
  • Be fully familiar with lubrication requirements and the different type of lubricants.

Practical Skills:

  • Know how to select, use and maintain all the mechanical hand tools (all types of keys, files, drills, callipers, taps…).
  • Be able to use measuring tools (micrometer, vernier, gauges…), torque wrench and fastener.
  • Be able to operate and maintain pneumatic drills or grinders.
  • Be able to use workshop equipment (pedestal drill, hydraulic press…), in particular machining and tooling.
  • Know how to use basic lifting gear (chain block, slings…). Be trained to complete simple / basic lifting operation.

Interested and qualified candidates should:
Click here to Apply for this Position

Leave a Comment

Your email address will not be published.