CLICK TO GET FASTER JOB UPDATES DAILY (SERIOUS JOBSEEKERS)  

Overview

OilRig Recruiter – Our client, a leading Oil & Gas drilling company with its head office in Lagos, Nigeria, is seeking qualified applicants to fill the vacant position of:


Job Title: Driller

Location: Lagos
Ref: OR-SD-005
Job Description

  • Operates all equipment at the Driller’s console in a safe manner; maintain a clean, tidy and hazard- free condition on the drill floor and associated area.
  • Assists in the planning, organization and supervision of rig move operations.
  • Monitor the well condition at all times (i.e depth, mud weight, weight on bit). Recognize, interpret and respond to down hole conditions.
  • Perform drilling-related operations such as directional drilling, working stuck pipe, running and cementing casing strings, coring, fishing, and assisting in wire line logging, well testing, and other special operations.
  • Supervise and direct operations in the picking up or laying down of tubular and all drilling- related equipment
  • Ensure that the solid control equipment and mud mixing operations are being monitored constantly.
  • Hold pre-tour meeting with the drilling for all drilling crew operations.
  • Secure the well during an emergency or well control situation; assist in the well- killing operations
  • Maintain equipment files, drilling logs and records; perform all technical calculations required to carry out drilling operations.
  • Inform Toolpusher and customer representative if a deviation from planned operation occurs.
  • Supervise the lubrication and maintenance of all drilling and associated equipment and ensure it is carried out in accordance with the Preventive maintenance system.

Qualification/ Experience

  • Graduate/ Engineering added advantage
  • Valid well control certificate driller level
  • At least 2- 5 years experience

Job Title: Electrical Supervisor
Ref: OR-SD-009
Location: Lagos
Job Description

  • Supervise the maintenance and repair of all electrical and electronic equipment onboard the vessel.
  • Ensure daily completion of inspections and maintenance on electrical/electronic equipment.
  • Enforce the permit to work and isolation system within the electrical/electronic department.
  • Ensure that the Technical Support Center (TSC) is advised of electrical issues as required.
  • Supervise the maintenance, troubleshooting and repair of electronic systems including dynamic positioning, communication, data acquisition, computers and navigational equipment
  • Ensure that an adequate supply of spares is maintained onboard to fulfill maintenance requirements and facilitate a safe and efficient operation
  • Assist the maintenance supervisor/Chief Engineer in supplying information for maintenance and repair budget.
  • Ensure that all installation, calibration and modification to electronic systems and components are properly carried out.
  • Report any incidents, potential hazards or abnormal situations to the maintenance supervisor/ Chief Engineer and other departmental heads.
  • Actively participate in weekly safety meetings and pre-tour meetings as required.
  • Ensure a high standard of hygiene and housekeeping is maintained onboard the rig.

Qualification/Experience:

  • Electrical Engineering / Electrical Technology Degree
  • Valid medical examination and vaccination certificates.
  • 2-5 years experience.

Job Title: Maintenance Supervisor
Ref: OR-SD-008
Location: Lagos
Job Description

  • Supervise and control the maintenance and repair of mechanical, electrical, electronics, subsea, and information technology equipment on the vessel.
  • Maintain control over the rig’s Rig Maintenance System (RMS) and associated computer database.
  • Coordinate periodic maintenance activities with the OIM and other department heads.
  • Plan the service and maintenance of equipment according to the RMS guidelines.
  • Ensure that reports for repair and maintenance of equipment are accurate and complete
  • Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability.
  • Inform the OIM and other department’s heads of any technical problems or limitations that may affect the safe operation of the rig.
  • Supply rig management with maintenance statistics of the vessel.
  • Approve all maintenance department requisition purchase orders.
  • Document any and all changes to the RMS system and provide reasons for making these changes to Rig Manager via direct supervisor.
  • Provide input in the survey of the vessel and ways to reduce the out of service time of the vessel.
  • Communicate equipment problems or breakdown information via direct supervisor to field support group.
  • Implement follow-up requirements of audits, as issued by clients, regulatory authorities or rig management.

Qualification/Experience

  • Any Engineering course
  • Valid medical examination and vaccination certificates
  • 3-5 years experience

Job Title: Offshore Installation Manager
Ref: OR-SD-007
Location: Lagos
Job Description

  • Manage the manpower and resources of the rig to achieve optimum performance so as to ensure the well program is carried out in a safe, efficient and productive manner.
  • Hold daily operations meeting with Customer Representative and rig department heads.
  • Promote and ensure that all company policies and procedures are communicated and understood by personnel on the rig.
  • Manage the planning and efficient execution of the drilling program in coordination with Customer Representative and rig department heads.
  • Ensure pre-tour meetings are carried out involving all on board personnel.
  • Organize and supervise the activities of drilling, marine and maintenance departments and ensure rig-specific procedures are understood and observed by all personnel onboard.
  • Maintain daily communication with the rig manager on all relevant activities regarding the rig’s operation and needs
  • Supervise and perform jacking operations for jack-up drilling units
  • Ensure that pre-spud meetings are conducted and that well related hazards are recognized and managed appropriately by the key personnel.
  • Plan operations with the marine department as related to rig moves, mooring, station keeping and stability. Ensure that guidelines of the rig’s marine operations manual are understood.
  • Responsible, along with customer representative, for all third-party services on the rig and ensure that they comply with Shelf Drilling policy and safety processes.

Qualification

  • Any Engineering course
  • Valid medical examination and vaccination certificate
  • Valid well control certificate surface stack supervisor

Experience

  • 12 Years above.

Job Title: Toolpusher
Ref: OR-SD-006
Location: Lagos
Job Description

  • Responsible for the drilling operations and associated activities and ensure that they are in accordance with the well program.
  • Ensure drilling operations are carried out in a safe, efficient and productive manner.
  • Ensure that the driller is provided each tour with the Standing Instructions to Driller (SID) that is relevant to the planned operations.
  • Monitor the maintenance, repair and installation of all drilling equipment including repair, lubrication, maintenance records, and inventory levels.
  • Maintain records of inspections and certification of drilling equipment, tools and tubular.
  • Ensure the mud mixing systems and solid control equipment are being monitored constantly and properly maintained.
  • Relieve the Driller at the Driller’s console as operational requirement demands
  • Partake in the daily operations meeting with the OIM and other rig department heads.
  • Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed.
  • Demonstrate commitment to company safety policies through the consistent application of leadership and guidance.
  • Ensure that DROPS inspections are conducted as per rigs DROPS inspection program.
  • Provide leadership and motivation to rig personnel. Ensure that continuous improvement is applied routinely.

Qualification/Experience

  • Graduate/ Engineering added advantage
  • Basic computer skills
  • Valid medical and vaccination certificate.
  • 9Yrs. Above

Job Title: Chief Mechanic
Ref: OR-SD-004
Location: Lagos
Job Description

  • Maintain and repair mechanical, pneumatic and hydraulic equipment onboard the rig.
  • Perform daily inspections and maintenance of mechanical equipment.
  • Supply information to assist in the development of maintenance and repair budget.
  • Assist in maintaining marine equipment i.e. cranes, thrusters, ballast pumps and valves, auxillary equipment, etc.
  • Ensure that service, maintenance and other operational reports are accurate and complete
  • Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of rig’s stability.
  • Communicate equipment problems or breakdown information via direct supervisor to technical field support
  • Carry out classification society surveys as part of continuous survey of machinery.
  • Plan and coordinate with other department’s prior t any major activity such as rig moves, running and retrieving BOP, etc.
  • Inform supervisor and other departments heads of any technical problems or limitations that may affect the safe operation of the rig
  • Prepare annual performance appraisal for all subordinates. Recommend promotions or disciplinary action up to and including discharge.
  • Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation
  • Troubleshoot and repair faulty mechanical, pneumatic and hydraulic drilling equipment and tools.

Qualification and Experience

  • Mechanical Engineering
  • Valid medical examination and vaccination certificates.
  • 6 yrs and above

Job Title: Chief Electrician
Ref: OR-SD-003
Location: Lagos
Job Description

  • Responsible for the installation, maintenance and repair of all electrical equipment onboard the rig.
  • Ensure daily inspections and maintenance on electrical equipment is carried out.
  • Carry out periodic maintenance according to the J.D.E guidelines and coordinate same with supervisor and other department heads.
  • Carry out maintenance and repair on electrical components of drilling equipment, i.e. Driller’s console, DC drilling motors and auxiliaries, Top Drive System, draw-works, mud pumps, etc.
  • Ensure that all subordinates have the necessary skills and experience to fulfill their assigned tasks in a safe and efficient manner.
  • Supervise and guide crew members in their On the Job Training (OJT) program.
  • Incorporate the risk assessment planning process into all tasks, whether working alone or as part of a team
  • Ensure that reports for repair and maintenance of equipment are accurate and complete
  • Communicate equipment problems or breakdown information via direct supervisor to Technical Field Support
  • Gather data from instruments interpret past and present performance to understand trends and ensure problems are solved.
  • Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation- generate requisitions as required.

Qualification

  • Electrical/ Electronics Engineering Degree
  • Valid medical examination and vaccination certificates

Experience: 5- 10 yrs

Job Title: Assistant Barge Master
Ref: OR-SD-001
Location: Lagos
Job Description

  • Assists the Barge Master in ensuring that all marine aspects of the rig’s operation are carried out in accordance to statutory and regulatory controls and guidelines.
  • Supervises Crane Operators, Roustabouts and Painters in work related to drilling operations, deck maintenance, loading and offloading workboats, e.t.c
  • Ensure that all official log books are accurately and completely filled out and signed by the proper persons and maintain the vessel or as required by policies and regulations.
  • Assist in monitoring weather/environmental conditions. Advise the Barge Supervisor/ OIM on conditions likely to affect drilling operations and seaworthiness of the rig.
  • Review, understand and become familiar with the rig’s safety case.
  • Assist the Barge Supervisor during emergency situations and emergency protection responses as designated on the station bill.
  • Coordinate all helicopters and supply boats traffic to the rig and assist in supervising transfers of materials to and from the rig.
  • Assist in ensuring that all marine and navigation equipment is properly maintained and ready for use at all times.
  • Supervise tests on firefighting, lifesaving equipment, obstacle lighting and audible signals.

Qualification

  • Any Engineering course/ High School Diploma
  • Basic computer skills
  • Valid medical examination and vaccination certificates

Experience: 8 Yrs. Above

Job Title: Barge Master
Ref: OR-SD-002b
Location: Lagos
Job Description

  • Supervises the operation of the marine department to ensure the safe and efficient running of the rig.
  • Actively participate in the daily operations meeting with the OIM and other rig department heads and coordinate activities with the company representatives.
  • Ensure that all marine aspects of the rig’s operations are carried out in accordance with statutory and regulatory controls and guidelines.
  • Assist in the effective management of the preventive maintenance system and ensure that all records are properly maintained.
  • Supervise the operation and maintenance of pollution control system
  • Coordinate and supervise periodic inspections of the rig’s structure, including hull compartments and critical joints and liaise with any 3rd party inspection teams for cranes/lifting gear/ and hull inspections.
  • Prepare and supervise rig move plans and associated mobilization preparations.
  • Ensure that all lifting gears are inspected and certified, correctly color coded, maintained, and stowed properly.
  • Operate and maintain the bulk system as required.
  • Ensure that cranes are in safe working condition.
  • Monitor quantities of expendables such as fuel, potable water, drill water, etc.
  • Ensure that a high standard of hygiene and housekeeping is maintained onboard the rig and coordinate inspections with the medic/OIM/RSTC

Qualifications

  • Any engineering course
  • Basic computer skills
  • Valid medical examination and vaccination certificates

How to Apply
Interested and qualified should send their CV’s and applications to:[email protected]

Or
Click here to apply online

Application Deadline 25th November, 2014

GET FASTER JOB UPDATES DAILY (SERIOUS JOBSEEKERS)